Copyright: ® Edmund Meulendick


Inhalt

Table of Contants

Introduction

History

System Requirements

Working with WINDOG's

Welcome Screen

Main Menu

Dog Management

Dynamic Pedigree

Address Management

Selections

Results HZS/BSP

Selections

Kennel Administration

Compose Pedigree

Utilities

Special programs

Distributors


History

Since the beginning of shepherd dog breeding in 1899, the breeding results were documented in yearly issues of the breed- and studbooks provided by the German Shepherd Dog Breeding Association. In addition there were all the catalogues of the main dog shows and the results of them in the magazines of the association. This means for dog lovers, in particular for dog breeders they have to cope with an incredible and enormous amount of information. If there is information available at all, it took you days and days to study all the sources one can think of in order to gather the information just needed.

Because of these problems the idea evolved to develop an information system for German Shepherds which is able to hold all information about a certain dog and is very user friendly at the same time; meaning that everybody - even a non trained PC-user can handle it. All data entered and stored once can be easily retrieved, maintained and printed by the simple click of a button.

So a system was developed over the time, which is now even more than the original idea.

The first steps were done with WINDOG's 1.0 © for German Shepherds which came on the market 1993, due to the comfortable design of all the screens and the simple handling of the system, this program started a triumphal procession reminding to the roman victories.

With the version WINDOG's 2.0 © a lot of added functionality and as well many modified features were available like five generation pedigrees, support for working trial results, additional printouts, display of brothers and sisters and a lot of additional selections etc. etc..

With the improvements of Version 2.1 it seems that WINDOG's © is the best dog information system currently available on the market

Edmund Meulendick & Jürgen Zimmermann


System Requirements

Before you can start working with WINDOG's 2.1 the very first time you have to install the program on your computer.
The Windows based installation program eases this work for you.

siehe auch:

Minimum System Requirements


Minimum System Requirements

For a successful execution of WINDOG's  2.1 the following hardware is required :

MS-DOS Operating system, Version 3.1 or higher
( recommended is MS-DOS 5.0 or higher )

Microsoft Windows, 3.0 or higher
( recommended is 3.1 )

A PC with 486-DX processor or higher
( recommended is a 486/66 or 80 Prozessor )

Minimum 4 MB main memory
( recommended is 8 MB, or even better 12 or 16 MB )

15 MB free disc-space on your hard disk

3,5-Inch Disk drive ( 1,44 MB )

Microsoft Mouse

To print select from :

all printers, supported by Microsoft Windows,
Version 3.0 or 3.1.

Useful add on components

More main memory for better performance

256-colour graphics adapter (or higher) for better pictures onscreen


Welcome Screen

This screen will be always shown first when you start the program. Clicking on 'OK' takes you to the main menu.


Main Menu

From the MAIN MENU you can start the different modules by a simple click on the option name. Either another menu appears or the desired function is opened.


Dog Management

Dog Information

Picture

Change dog information

New Dog

Check Doubles

Enter Sire

Enter Dam

Pedigree

Progeny

Brothers and Sisters

Print Dog info form

Show

Working (Trial)

Attach Parents

Attach Breeder

Attach Possessor

Attach Owner

Show Breeder

Show Possessor

Special Information


Dog Information

On this screen you find already a lot of information of the selected dog.

siehe auch:

Find Male

Find Bitch

Name

Owner

Breed register

Registration Number (No.)

Date of birth

Working Title (AKZ)

Show rating

Breed Survey

Assessment Grade

Hip Dysplasia (a)

Sire

Show sire's info

Dam

Show dam's info

Breed survey report


Find Male

Click on the little button on the righthand side of the field to open the pull down menu in which you can scroll through or speed up the search by typing the starting letters of the desired dog.

As soon as you type the first character the list will scroll according to it in alphabetical order.

If the name of the dog is highlighted just hit the ENTER key or you can select it with a mouse click.

If you can not find the desired dog it is either written in another way or it is not in the database. A new dog can be added with function 'New Dog'.


Find Bitch

Click on the little button on the righthand side of the field to open the pull down menu in which you can scroll through or speed up the search by typing the starting letters of the desired dog

As soon as you type the first character the list will scroll according to it in alphabetical order.

If the name of the dog is highlighted just hit the ENTER key or you can select it with a mouse click.

If you can not find the desired dog it is either written in another way or it is not in the database. A new dog can be added with function 'New Dog'.


Name

Here you find the name of the dog, this field can not be edited after the dog is added to the system.


Owner

The name of the owner is shown here. Clicking onthe button next to this field will show the complete information of this person.

If there is no owner shown or you like to attach a new one please use the 'Attach Owner Attach Owner button in the lower part of the screen.


Breed register

Here the abbriviation of the respective breed registration office will be shown ( SZ DKK NHSB usw. )


Registration Number (No.)

Registration number of the dog.


Date of birth

Date of birth of the dog.


Working Title (AKZ)

Working title of the dog

SchH 1 / 2 / 3	German qualification

FH	Tracking dog qualification

IP 1 / 2 / 3	International qualification

VH 1 / 2 / 3	Netherlands qualification

BHP 1 / 2 / 3	Danish qualification

or others as appropriate.


Show rating

Show rating of the dog

VA	Elite - Dogs

V	Excellent

SG	Very Good

G	Good

or others as appropriate.


Breed Survey

Breed Survey (Yes or No)


Assessment Grade

Shows the assessment grade (1 or 2)


Hip Dysplasia (a)

Shows the hip dysplasia status of the dog.

normal / fast normal / noch zugelassen or any other term which is appropriate


Sire

Shows the father of the selected dog.

If there is no name visible you can select the father from the database, by clicking on the 'Attach Parents' button.


Show sire's info

Clicking on the sire's name shows you the father's information screen.


Dam

Shows the mother of the selected dog.

If there is no name visible you can select the mother from the database, by clicking on the 'Attach Parents' button.


Show dam's info

Clicking on the dam's name shows you the mother's information screen.


Breed survey report

Here the breed survey report of the selected dog is shown


Picture

If there is no picture for the current dog in the database the button 'Add Picture' is visible, if a picture is available the button changes to 'Show Picture'.

Click on the button and the picture will be displayed.

The program enables you to add picture packages you ordered from MZ-Software ('Utilities'/'Updates from MZ-Software or to add single pictures with the 'Add Pictures' function.

siehe auch:

Insert Picture


Insert Picture

With this function you can add your own pictures.

Select the type of picture (Paintbrush Picture)you like to add and click on the File button.

Select the picture you like to add for the current dog and click on OK.

The picture will be added to your picture database.

You can use most of the popular graphic formats. But keep in mind that the size of the picture will not be reduced while it is added.

The following format we found the most appropiate:
Format : BMP	256 Colours	3cm high

Close takes you back to the dog information screen.


Change dog information

If you want to change the information of a dog or add information to it, click on the button Change dog info. Now the screen changes that you can edit all fields except the name of the dog. If you want to add or change the owner, breeder, possessor, sire or dam please click the corresponding 'Attach' button.


New Dog

This allows you to add new dogs by yourself.

The button New Dog takes you to a screen similar to the dog information, but you are able to add a new dog to your system including all relevant data.

After you entered the name of the dog you can use the TAB-Key to get to the next field or you can use the mouse to select the next field.

siehe auch:

General


Working with WINDOG's - New Dog - General
General

Assign sire or dam to the new dog, by pushing the button Attach Parents. Now you can choose sire or dam from the pull down menus as described before. After selecting sire or dam they are directly assigned to the dog you entered and you also earn their pedigrees as far as they are in the system.


Check Doubles

If  you see this hint from the Check Doubles function, you tried to enter a dog which is already in the database. If you tried already to find it, go to the Change Display function (Main Menu / Utilities) and change display of this dog 'Yes'.


Working with WINDOG's - Dog Management - Enter Sire
Enter Sire

If you can not find the sire you are looking for with the attach parents function here you can add a new sire directly. After you entered the new sire simply click the Close button and the new sire will be automatically attached to the current dog.


Working with WINDOG's - Dog Management - Enter Dam
Enter Dam

If you can not find the dam you are looking for with the attach parents function here you can add a new sire directly. After you entered the new dam simply click the Close button and the new sire will be automatically attached to the current dog.


Working with WINDOG's - Dog Management - Pedigree
Pedigree

After you clicked on the Pedigree button, the pedigree of the current dog will be generated and shown on the 5 generation pedigree screen. If you now point on one of the names of the ancestors an information screen will show you further data about the selected ancestor. Close takes you back to the pedigree screen.

siehe auch:

Picture Pedigree

Print


Working with WINDOG's - Pedigree - Picture Pedigree
Picture Pedigree

After you clicked on the 'Picture Pedigree' button, it will be displayed with three generation like below.


Working with WINDOG's - Pedigree - Print
Print

Of course you are also able to print the displayed pedigree, just click on the Print button. A print preview will be displayed and if you like to print it select 'Print' from the 'File' menu.


Progeny

You can also let the system show the progeny of the selected dog. To do so click on the provided button in the lower part of the screen.

On the progeny screen you are able to invoke further information about a single dog by double clicking on the name of the desired progeny. If you now push the Close button you return to the progeny screen, pushing Close on the progeny screen takes you back to the dog information.


Working with WINDOG's - Dog Management - Brothers and Sisters
Brothers and Sisters

If you push this button all brothers and sisters of current dog will be displayed this gives you a good overview on the litter.


Print Dog info form

Clicking on this button enables you to print a Dog info form of the selected dog with all important information related to it. If there is a picture available you have the choice to print the form either with or without the picture.

If a picture is available click the corresponding button


Show

You can also open a screen which displays the results of the Sieger Shows of the current dog. To do so simply click on the Show button.

Of course you are able to enter sieger show results,

to do so add the required information to the corresponding fields. Closing the screen and opening it again will show the results sorted by the year in ascending order.


Working (Trial)

You can also open a screen which displays the results of theWorking Trial of the current dog. To do so simply click on the Working button.

Of course you are able to enter working trial results

 to do so add the required information to the corresponding fields. Closing the screen and opening it again will show the results sorted by the year in ascending order.

Close takes you back to the dog information screen.


Working with WINDOG's - Dog Management - Attach Parents
Attach Parents

If you want to add or change sire or dam please click the 'Attach Parents' button. Two pull down fields will appear on the screen where you can search for the name, if you can not find the name of the dog you are looking for it means that it is not in the database. In such a case you should select the expression * No information about sire *,* No information about dam *.


Attach Breeder

Here you can attach the breeder of the dog..


Attach Possessor

Here you can attach the possessor of the dog. In case of dogs taking part in the workoing trial the dog's guide should be attached.


Working with WINDOG's - Dog Management - Attach Owner
Attach Owner

Here you can attach the breeder of the dog.


Show Breeder

Pushing the Breeder button (visible only if a breeder is attached) will display the address of the breeder who is attached to this dog.

Close turns of the display of the breeder or possessor.


Show Possessor

Pushing the Possessor button (visible only if a possessor is attached) will display the address of the possessor who is attached to this dog.

With dogs which took part in the working trial the dog's guide is displayed.

Close turns of the display of the breeder or possessor.


Special Information

Pushing the Special Information  button will display a 'secret' information about this dog. Any information can be added format free. But using always the same terms allows easy selections on your own critiria.


Dynamic Pedigree

Create Pedigree


Create Pedigree

To walk through the single bloodlines of a certain dog use the Dynamic Pedigree function which you start from the main menu.

A screen appears where you can select a male or bitch of your choice, the pedigree of this dog will be created then automatically.

This pedigree allows you to walk through it backwards, this means that if you click on the name of one of the ancestors this dog becomes the first dog in the new pedigree. This process can be repeated as long as ancestors are available. You can always go back to the first dog you selected by clicking on the corresponding button.

You are also able to print the currently displayed pedigree.

siehe auch:

Picture Pedigree

Print


Working with WINDOG's - Create Pedigree - Picture Pedigree
Picture Pedigree

After you clicked on the 'Picture Pedigree' button, it will be displayed with three generation.


Working with WINDOG's - Create Pedigree - Print
Print

You are also able to print the currently displayed pedigree.


Address Management

Display Address


Display Address

The option Address Management as all others allows you to select any address in the system and display it. Also you can change every person's address (Change Person's Data) as well you are able to add a new person using the corresponding button.


Working with WINDOG's - Selections
Selections

With this option you have the ability to display lists of all persons in the database which fulfil the criteria given by you.

siehe auch:

Selection results


Selection results

Select e.g.  Conformation Judges of region 05

When the list is displayed you can get further information about the person by clicking on its name.


Results HZS/BSP

HZS (Sieger Show)

BSP (National working trial)


HZS (Sieger Show)

If you bought the add on package "Results HZS/BSP" and subscribed for the Abo HZS you can get every year Sieger Show results on disk approx. 3 weeks after the show. This function allows you to display and print the information we delivered and also it is possible to transfer all the data to your main database this also extends the number of dogs in your system.

To look at the results you open the pull down list of the Assessment list HZS, now select the class and year you like to see.

To browse through the list you can use the scroll bar on the right or mark the little box on the left and then use the arrow keys.

Marking one or more (use shift or control) records you can select the copy function from the pull down menu to copy the records to the clipboard. This allows you to use the data with other application like Winword, Excel etc..

siehe auch:

Select dogs

Print HZS list !

VA Dogs


Select dogs

Also you have the possibility to transfer selected dogs into your main dog database.

After clicking on the Select dogs button you will be asked to enter the year and class (e.g. 1994 and GHKLR).

Click on OK and you see the following screen.

Now you can select all dogs of this class (click on ALL) or you can mark each single dog you want to transfer. To mark single dogs you have to click on the little circle on the right side of each dog (then it changes from No to Yes). Now you can start to transfer the dogs and the additional information to your main database, to do so click START.

With the button NONE you can you can undo your selection.

Of course you can copy the selected records to the clipboard by using the copy function from the pull down menu.


Print HZS list !

After clicking on the Print HZS list button you will be asked to enter the year and class (e.g. 1994 and GHKLR). Click on OK and the list will be printed.


VA Dogs

Clicking on this button you will be asked for the year of which the list should be. The list will show all VA dogs (Pick of the best) of the desired. When the list is displayed you can use the Print button to get a paper printout.

Of course you can copy the selected records to the clipboard by using the copy function from the pull down menu.


BSP (National working trial)

To look at the results you open the pull down list of the Assessment list BSP, now select the year you like to see. To browse through the list you can use the scroll bar on the right or mark the little box on the left and then use the arrow keys.

Of course you can copy the selected records to the clipboard by using the copy function from the pull down menu.

siehe auch:

Select dogs !

Print BSP list !


Select dogs !

Please refer to the describtion under HZS (chapter before).


Print BSP list !

Please refer to the describtion under HZS (chapter before).


Working with WINDOG's - Selections
Selections

siehe auch:

Selections on dog database

Selections with BSP

Selections with HZS


Selections on dog database

Here you have several criteria which can be set by yourself to select dogs from your main dog database.

Default value for all criteria is ALL. After you marked Selection a text field will appear where you can enter your parameters for this selection.

In addition you can sort yor selection by different criteria.

siehe auch:

General


Working with WINDOG's - Selections on dog database - General
General

Selections are really meaningful if you combine different criteria:

e.g. Name: All	Hip Dysplasia: normal	Breed Survey: V*	Sire: Uran vom Wildsteiger Land.

Result = All dogs with VA or V rating, Hip Dysplasia normal and where the sire is Uran vom Wildsteiger Land.

Any combination of criteria is possible but you should not try to run absolutely crazy selections which do not make sense, normally the system just gives you a zero result and runs very long. Even we tried to prevent you from all possible errors it might happen that the system stops or crashes in such a case please inform MZ-Software about it. Thank You !


Selections with BSP

Here you have several criteria which can be set by yourself to select dogs from your BSP database.

Default value for all criteria is ALL. After you marked Selection a text field will appear where you can enter your parameters for this selection.

In addition you can sort yor selection by different criteria.

siehe auch:

General


Working with WINDOG's - Selections with BSP - General
General

Selections are really meaningful if you combine different criteria:

e.g. Name: A*Region: 05*Breed Survey: V*Year: 1993.

Result = All dogs with V rating of region 05 in the year 1993.

Any combination of criteria is possible but you should not try to run absolutely crazy selections which do not make sense, normally the system just gives you a zero result and runs very long.


Selections with HZS

siehe auch:

General


Working with WINDOG's - Selections with HZS - General
General

Selections are really meaningful if you combine different criteria:

z.B. :
Year : 	1993
Class : 	GHKL*
Breed Survey : 	V*
Place : 	1 bis 20
Sire: 	Uran vom Wildsteiger Land.

Result = All dogs with V or VA rating up to place 20 of the Gebrauchshundklasse male and female of the year 1993 where the sire is Uran vom Wildsteiger Land.

addition you can sort yor selection by different criteria.

Any combination of criteria is possible but you should not try to run absolutely crazy selections which do not make sense, normally the system just gives you a zero result and runs very long.


Kennel Administration

Puppy overview

Change Puppy data

Pedigree

Brothers and Sisters

Attach Parents

Attach Owner

Add Puppy

Enter Sire

Enter Dam

Transfer Puppy entry

Sales Contract


Puppy overview

With the Kennel Administration you are able to maintain all puppies of your kennel. The Puppy overview gives you an detailed overview of the puppy you selected from the pull down fields Find male or Find Female.

siehe auch:

Find male

Find female

Selection

Print puppy lists


Find male

Open this field with a mouse click and select your puppy by the first name.

As soon as you type the first character the list will scroll according to it in alphabetical order.

If the name of the dog is highlighted just hit the ENTER key or you can select it with a mouse click.


Find female

Open this field with a mouse click and select your puppy by the first name.

As soon as you type the first character the list will scroll according to it in alphabetical order.

If the name of the dog is highlighted just hit the ENTER key or you can select it with a mouse click.


Selection

Here you can select your puppies by different criteria (whether they have a show rating, working title or breed survey).


Print puppy lists

Of course you can also print lists of your puppies. Available lists are; Puppies with show rating, working title or breed survey and a complete list of all your puppies.


Change Puppy data

Clicking on the Change Puppy data button you can change or add data of a puppy you already entered. Puppy names you mistyped can be changed as well, the system takes care that you do not use a first name twice. The button Puppy overview closes the change data screen.

For the meaning of the different fields please refer to the puppy overview description.


Working with WINDOG's - Kennel Administration - Pedigree
Pedigree

Of course you can look at the pedigree of the current puppy, the functionality on the pedigree screen is equivalent to the one in the Dog Management


Working with WINDOG's - Kennel Administration - Brothers and Sisters
Brothers and Sisters

Clicking on this button shows you all brothers and sisters of the current puppy.


Working with WINDOG's - Kennel Administration - Attach Parents
Attach Parents

If you want to add or change sire or dam please click the 'Attach Parents' button. Two pull down fields will appear on the screen where you can search for the names.


Working with WINDOG's - Kennel Administration - Attach Owner
Attach Owner

If you want to add or change the owner please click the corresponding 'Attach Owner' button. A pull down field will appear on the screen where you can search for the person.


Add Puppy

With Add Puppy you can enter new puppies to your kennel (in the name field only enter the first name). Add all other information like date of birth, tattoo or sex.


Working with WINDOG's - Kennel Administration - Enter Sire
Enter Sire

If you can not find the sire you are looking for using the Attach Parents function here you can add it directly with Enter Sire. After you entered the new sire simply click the Close button and the new sire will be automatically attached to your puppy.


Working with WINDOG's - Kennel Administration - Enter Dam
Enter Dam

If you can not find the dam you are looking for using the Attach Parents function here you can add it directly with Enter Dam. After you entered the new sire simply click the Close button and the new sire will be automatically attached to your puppy.


Transfer Puppy entry

A puppy which is old enough and of which you think it should be in the main dog database (e.g. as your own stud bitch) can be transferred to the main dog database by pushing the button Transfer Puppy.

The puppy is still available in the kennel administration and all functionality except the puppy sales contract as well (use the General Sales Contract under Utilities).


Sales Contract

With this button you can print a sales contract for the current puppy. Please take care that the new owner is already assigned to your puppy, his data will be entered into the contract as buyer. After you activated this function you will be asked for the price and also for the price in words.


Compose Pedigree

Select coupling


Select coupling

If you click on the Compose Pedigree button you can create your own pedigrees. Select a sire of your choice in the upper half of the screen and a dam in the lower half, the system creates the pedigree for you.

This function should support your breed planning and allows you to check for expected inbreeding.

The three generation picture pedigree is also available.

Close takes you back to the main menu.

siehe auch:

Print


Working with WINDOG's - Select coupling - Print
Print

It is possible to print the pedigree you just designed.

It is possible to print the pedigree you just designed.


Utilities

siehe auch:

Change Display

Change sales contract

Print general sales contract

Delete person records

Delete dog records

Delete pictures

Update from MZ - Software

Backup Data

Restore Data

Add dog to puppy list

Print order form


Change Display

Using the Change Display you can decrease the number of dogs displayed in the pull down bars on the Dog Information screen. If you try to add a dog which is already in the system but display is set to no the program gives you the information that you tried to enter a dog twice.


Change sales contract

Here you can add or change your own address and the free text for the Puppy sales contract and the general sales contract..


Print general sales contract

Here you can print a sales contract for all dogs in the main dog database. On the screen you will see next you select a dog from the pull down bar afterwards you will be asked to enter the price and the price in words.


Delete person records

Here you can select a person from the pull down bar on the top of the screen but only persons are available who are not owner of a dog. If you want to delete a person who is not in the list, first remove all ownership's in the dog information or puppy overview screens.


Delete dog records

Here you can select a dog from the pull down bar on the top of the screen. But only dogs are available which are not sire or dam of another dog's pedigree.


Delete pictures

Here you can delete pictures you do not need anymore.


Update from MZ - Software

With this function you are able to update your system with dogs, pictures, HZS and BSP data delivered by MZ - Software.


Backup Data

With this function you can backup the information which is in the main dog database. You should do a backup whenever you added or changed a number of dogs or information related to them.


Restore Data

With Restore Data you can restore the status you saved last time with Backup Data.


Add dog to puppy list

If you have bought the kennel administration option it might be possible that one or more of your dogs is already in main dog database. As the system does not allow duplicate names you can not enter this dog as a puppy but do not need to delete the dog. Using this function you are able to add dogs with your kennel name to your kennel administration. From the pull down bar you can select a dog with your kennel name afterwards you need to enter the first name and you can also enter the tattoo. If you click on Add to kennel the dog will be available in the kennel administration.


Print order form

This function prints a form you can use to fax or mail for additional dogs, pictures etc. or to order WINDOG's for a friend.


Special programs

These special programs are already available respectively in preparation. For further information contact MZ-Software.

siehe auch:

Create, Print, Delete Catalogue

Breeder's Manual

Mating Book

Data exchange with MZ-Software


Create, Print, Delete Catalogue

This add on will allow you to use the information you have available in WINDOG's to print a catalogue for your local show. The printouts are of a quality which is ready for the print shop.


Breeder's Manual

Zuchtordnung, Körordnung, Prüfungsordnung, etc. only available in German


Mating Book

A mating book on your PC with WINDOG's


Data exchange with MZ-Software

Data exchange with MZ - Software and/or other WINDOG's users.

If you are interested in these special programs do not hesitate to contact MZ-Software also something you need is not available yet let us know we appreciate your comments.


Technical Hotline

Monday to Friday
from 6 am to 8 am

Telephone :

Edmund Meulendick 	#49/02163 - 80425

Jürgen Zimmermann 	#49/02163 - 83778

or Fax	#49/02163 - 83448


Distributors

Canada/USA

Skandinavia

Germany (Mail Order)


Canada/USA

Chris Fairhurst
c/o Custom Specialties
R.R. # 1
Queensville, Ontario
Canada LOG 1R0
Fax :	#1-905-478-8571
Phone :	#1-905-478-8600


Skandinavia

Jimmy Rasmussen
Molledraget 3
8653 Them
Dänemark
Fax :	#45-86-848495
Phone :	#45-86-848495


Germany (Mail Order)

Jörg Neumann
c/o Tierbedarf Neumann
Reitbahn 9
47053 Duisburg
Fax :	#49/0203-667522
Phone :	#49/0203-667626


Glossary

Edmund Meulendick & Jürgen Zimmermann

LOF

NHSB

DKK

Picture Packages

BSP

Main Menu

Dog Info Form

HZS

Installation drive

Microsoft Windows

Close

SZ

Puppy name

WINDOG's

Kennel name

Kennel Administration

Package Offer

Dog Subscription

Mating Book

Breeder's Manual

Print Catalogue - Show/Working

BSP-Abo

Special programs

Picture Administration

Kennel Administration

Race independent Version


Edmund Meulendick & Jürgen Zimmermann

MZ Software

Edmund Meulendick & Jürgen Zimmermann

Kaldenkirchenerstr. 4

41372 Niederkrüchten

Tel. #49-(0)2163 -    E.M. 80425    J.Z. 83778

Fax 83448


LOF

French Breed Register


NHSB

Netherlands Breed Register


DKK

Danish Breed Register


Picture Packages

Approx.  100 pictures  via seperate order or subscription


BSP

German National Working Trial


Main Menu

From this screen you get to all program section..


Dog Info Form

With your printer you are able to print the dog info form of the current dog.  Beside all the important data of the dog (Reg. office & No., HD, Breed Survey Report etc.) it will also include the picture of the dog if available and the information about the owner.


HZS

German Sieger Show


Installation drive

Disc drive which is used for the installation of Windog's.


Microsoft Windows

User Interface & Operating system


Close

Clicking on this button closes the current screen and stores all added or modified data.


SZ

German Breed Register


Puppy name

Firstname of the puppy, Kennelname will be added by the system.


WINDOG's

WIN = Working with WINDOWS and DOG's = Info's about dogs


Kennel name

The plain name of your kennel


Kennel Administration

Section to maintain your own breed (Puppies).


Package Offer

An attractive offer for dog lovers to get started.


Dog Subscription

You can subscribe at MZ-Software to get always the latest dog packages (about 2 packages every 3 month. A dog pckage can contain Updates to already existing dogs or completely new dogs with the necessary data.


Mating Book

Supports control of the mating of your stud dogs.


Breeder's Manual

Infodatenbank mit systematischem Suchsystem nicht nur für den Hundezüchter


Print Catalogue - Show/Working

Produces prinatble copies for show and working trial catalogues including start numbers and judges. All data of dogs and persons available in the Windog's system can be reused.


BSP-Abo

Complete catalogue data of the event including the results and the ability to transfer all information into your main database.


Special programs

Available only in combination with the main program, WINDOG's.


Picture Administration

This function allows you to look at and print pictures of your database, which either obtained from MZ-Software or scanned yourself.


Kennel Administration

Function to administrate the breed of your own kennel. The system takes care that a first name is not used twice. You can also select and print lists of your puppies also you can print sales contracts for your puppies.


Race independent Version

This version of WINDOG's allows you to maintain almost all races. It is not specific for a certain race but very flexible so that the functionality is almost the same or can be justified to your needs. No dogs or other data is provided with this version.